软土地区管幕群顶管施工地面沉降监测与分析

依托上海14号线桂桥路站管幕段实例工程,对管幕群顶管顶进施工过程地面沉降情况进行监测,分析群顶管施工对地面沉降的影响,在此过程中对本工程采用水土分算或合算进行讨论。根据顶进过程实际工况和监测数据,分析管幕群顶管施工影响地面的原因,提出相应控制措施。结果表明:①管幕群顶管施工引起最大地面沉降出现在始发井出加固区区域;②在本工程中采用水土合算计算正面土压力较为符合实际情况;③管幕群顶管施工过程中影响地面变形的因素主要包括前舱压力、顶进速度、洞门止水、管壁摩擦和同步注浆等方面。     

Creep life assessment method for online monitoring of steam turbine rotors

The principal objective of work was to develop fast and accurate method for online creep life monitoring of steam turbine rotors. For this purpose, a characteristic strain model of creep was investigated and validated using test data of 2%CrMoV rotor steel. The model was then used to determine creep damage functions which are introduced to compute creep damage at a constant temperature based on the Robinson time fraction rule. Finite element (FE) creep calculations of a turbine rotor were performed using the same creep model to obtain reference damage results for validating the proposed method. Comparisons of the results obtained using both methods showed a very good accuracy of the online creep damage predictions.     

高低温循环及对称冲击耦合加载下 炸药的安全性研究

基于一级轻气炮加载装置，研究了高低温循环及对称冲击耦合加载下某黑索今(RDX)基含Al炸药的安全性，计算了缺陷处的内能等参数。结果表明:高低温循环后，炸药试样出现可见的孔隙。对称碰撞加载后，不经高低温循环的试样未发生点火，应力加载峰值为835 MPa，加载时间为35 μs；而经历高低温循环的试样出现点火，点火前应力为242 MPa，加载时间11 μs。高低温循环所产生的缺陷是导致炸药点火的重要原因。     

C反应蛋白和降钙素原指导高危新生儿预防性应用抗生素的效果、安全性和经济性分析

目的:评价应用C反应蛋白（C reaction protein，CRP）和降钙素原（procalcitonin，PCT）指导高危新生儿预防性应用抗生素的效果、安全性和经济性。方法:选取2015年7月至2017年1月慈溪市妇幼保健院收治的高危新生儿124例作为研究对象，随机数表法分为对照组（62例）和实验组（62例），对照组患儿均给予预防性应用抗生素治疗，实验组根据CRP和PCT选择性应用抗生素。比较两组患儿的细菌培养阳性率、脓毒症发生率以及不良反应发生率。结果:两组患儿的CRP和PCT水平和阳性率间均不存在统计学差异（t/χ2=0.299，-0.461，0.292，0.544，0.186，P=0.766，0.646，0.589，0.461，0.666）。两组患儿治疗前后的菌培养阳性率间均不存在统计学差异（χ2=0.040，0.287，P=0.842，0.592）；两组治疗后的菌培养阳性率均明显低于治疗前（χ2=47.825，40.367，P=0.000，0.000）；两组患儿脓毒症的发生率分别为12.90%和14.52%，差异无统计学意义（χ2=0.068，P=0.794）。实验组的NICU治疗和住院时间、机械通气时间以及治疗费用均显著低于对照组（t=2.904，2.729，2.152，5.337，P=0.004，0.007，0.033，0.000），两组的机械通气率间无统计学差异（χ2=0.372，P=0.542）。对照组患儿不良反应发生率为19.35%，明显高于实验组的6.46%（χ2=4.593，P=0.032）。结论:应用CRP和PCT指导高危新生儿预防性应用抗生素的效果与普遍性应用相似，可以明显减少治疗时间和治疗费用，明显降低治疗相关不良反应。     

A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes

Hydrogen, producing electricity in fuel cells, is a versatile energy source, but with risks associated with flammability. Fuel cells use enclosures for protection which need ventilating to remove hydrogen emitted during normal operation or from supply system leaks. Passive ventilation, using buoyancy driven flow is preferred to mechanical systems. Performance depends upon vent design, size, shape, position and number. Vents are usually plain rectangular openings, but environmentally situated enclosures use louvres for protection. The effect of louvres on passive ventilation is not clear and has therefore been examined in this paper. Comparison ‘same opening area’ louvre and plain vent tests were undertaken using a 0.144 m³ enclosure with opposing upper and lower vents and helium leaking from a 4 mm nozzle on the base at rates from 1 to 10 lpm, simulating a hydrogen leak. Louvres increased stratified level helium concentrations by typically in excess of 15%. The empirical data obtained was also used in a validation exercise with a SolidWorks: Flow Simulation CFD model, which provided a good qualitative representation of flow behaviour and close empirical data correlations.     

胶东三山岛西岭金矿区NW向断裂带的确定：综合物探证据

三山岛西岭金矿区位于渤海之滨，与北部海域金矿区相互连接，形成金资源量近千吨的巨型金矿床，矿床为地下与海底开采。区域内断裂发育，分布有NE向和NW向断裂，其中NE向断裂为控矿构造，而NW向断裂多具有不同程度的导水性，对矿床安全开采影响重大。基于矿区地质条件与地球物理特征，采用高精度磁测法和音频大地电磁（AMT）法在矿区东部进行了勘查试验，根据显示的磁性异常与电性异常，在平面上解译了NW向断裂(F-1、F-2)与NE向断裂（F-3、F-4），在L1剖面上解译了4条断裂，在L2剖面上解译了3条断裂。综合判断解译信息，NW向F-1断裂在平面与剖面上都反映良好。同时，与北部海域NW向构造研究资料进行对比分析，结果显示西岭矿区F-1推断断层与北部海域B-F4断层特征一致，吻合较好，推断西岭矿区NW向F-2断裂被F-3断裂错断。研究结果说明综合物探方法在该区域可行有效，为下一步钻孔验证NW向断裂存在，判断断裂富水及导水性质，以及未来矿床开发利用提供了地球物理依据。     

Wide area monitoring for energy system: a review

The power systems are functioning nearer to their capacity limits to increase the efficiency of the operation. With the prompt progress of smart grid, wide area measurement system (WAMS) is broadly and rapidly deployed in the EPS to understand, fore-cast, or even control the status of power grid stability in real time. Introducing phasor measurement units in addition to its advances have made them technically viable to monitor the stability of the PS using a wide area perception. This paper presents the review of WAMS and reports the various aspects of its operation in a power system. Initially, WAMS features, components, process, and its architecture are briefly described. The latter provides the data sources along with their standards required for WAMS and its applications. Also this paper gives a brief review on WAMPAC and various research openings for the development and implementation of real-time functions.     

Cold plasma processing of milk and dairy products

BackgroundThermal pasteurization and sterilization are predominantly used in the dairy industry due to their efficacy in improving the product safety and shelf life. However, heat treatment can cause undesirable protein denaturation, non-enzymatic browning, loss of vitamins and volatile flavor compounds, freezing point depression, and flavour changes. Cold plasma is a non-thermal technology that has gained attention in recent years as a potential alternative method for chemical and thermal disinfection in foods using ambient or moderate temperatures and short treatment times.Scope and approachThis review aims to describe the fundamentals, parameters, and technology on cold plasma, discussing the critical processing factors involved in this technology. Also, it describes the mechanisms of microbial inactivation and provides an overview of the effects of non-thermal plasma on the quality of dairy products, considering a physicochemical, sensory and microbiology perspective.Key findings and conclusionsCold plasma uses less aggressive mechanisms of action to the milk matrix when compared to the techniques currently used, and has shown an excellent performance on the elimination of pathogenic and spoilage microorganisms besides maintaining, in many cases, the nutritional, functional, and sensory characteristics of the product.     

Application of MSD prevention practices by nursing staff working in healthcare settings

ObjectiveThe objective of this article is to examine the application of MSD prevention practices among nursing staff and to identify organizational factors that may or may not support their application.MethodsWe measured the application of prevention practices and its determinants by means of a questionnaire filled out by 399 nurses and nursing staff in Canada. A qualitative component was conducted with two focus groups in order to validate and enrich the interpretation of the survey results.ResultsResults show that most respondents “often” (4) apply MSD prevention practices in their daily professional tasks. Significant differences were observed based on position, mission of the institution, degree, and training.ConclusionsThe characteristics of the nursing staff (position, training, etc.) and the specificities of the setting must be taken into consideration in MSD prevention interventions for nursing staff.